Stiffer, stronger, maximum performance
The Carbon mast set features a stiff high modulus carbon shaft and integrated plate paired with an aluminum fuselage. This mast uses two M8 screws to attach the aluminum fuselage to the carbon mast.
The shape of our Carbon mast has been optimized for overall flexural strength and torsional stiffness. The “variable chord” is wider closer to the top plate which gives maximum strength and stability. The chord gradually reduces in width and is much narrower at the joining with the fuselage, allowing for better glide, less drag, and more maneuverability. This combination also enables the foil to achieve much greater speed.
Secure airtight mast-fuselage connection. Maintaining a fully impenetrable connection with the foil, the new mast foot design improves lateral stiffness, securing a “one welded piece“ feeling between fuselage and mast.
Tough, strong, and streamlined. The intelligent locked-in system avoids any movement between the front wing and fuselage. The fuselage has an expanded collar to lock onto the mast and the front of the fuselage is split so when you tighten the first screw it expands and locks in the front wing. Helicoil screw inserts make for a completely secure back wing attachment. The overall hydrodynamic contour of the fuselage increases glide.
High-quality protection for your Carbon mast with an innovative magnetic closure and elastic support for securing the fuselage.
Carbon mast set
• 1x carbon mast with integrated top plate
• 1x aluminum fuselage HD
• 1x mast transport cover
• 1x Torx key M8
• 1x Torx key M6
• 2x M8 30mm (mast to fuselage)
• 4x M8 25mm & M8 T-nuts (mast to board)
• 1x M6 15mm & 2x M6 18mm (FW to fuselage)
• 2x M6 15mm (BW to fuselage)
• 1x Tef gel